It seems I've done something of interest...! Thank you to theprintspace for featuring me on their blog today.
You can find me talking about my experiences shooting 'A Moment of Opportunity' here...
The blog goes into some detail about my experiences shooting the commission for Action on Addiction. Having had the addiction side of things covered elsewhere, this was a great opportunity to talk about the photography side of things - after all, it's pretty rare for people to have the opportunity I did - working with some very vulnerable people in a groundbreaking way.
I stand by what I say about it having been the most rewarding work I've yet done. When I first started looking into doing this as a piece of work, I had no idea how it was going to end up - a few days before contacting the charity I'd watched as a bunch of guys cooked up and injected heroin in the alley behind my flat, and having asked around and done some research, it was pretty clear to me that the general impression of addiction was pretty bleak - people had only bad things to say, while a quick google search using keywords like 'addiction', 'drugs', 'alcoholic' and even 'treatment' bring up some terrible images.
I wanted to do a piece of work that showed the human side of addiction recovery - not focussing on the dark place that people find themselves in while they're servicing their addiction, but what happens to them after they go into recovery - but that was easier said than done. You're dealing with people who are in a very vulnerable state, and working with a charity where their main function is to protect and to treat those people. How on earth was I going to get the kind of access I haven't seen anyone get before?
I don't think any photographer can just walk into a meeting with a charity and say "commission me...!" and get the job - no matter how good or well-known they might be. I did my homework beforehand - I found out about the charity and its history, I looked into what had been done before, and probably most important, I asked myself what were the barriers I was most likely to face, and thought of ways I'd address them.
It's how I tend to work - I'm a worried. I guess it comes from my past life doing a job in local government that people were very suspicious of - every meeting I went into, I liked to have all the possible responses that I just knew were going to get thrown at me, so I could answer them all confidently.
It does seem to help that I'm a very nice person too though...
But that's probably the biggest piece of advice I could give someone starting a commission like this - to do your homework. I mean, pretty much all of my commissions have come from having ideas about what can be done long before getting into a meeting - whether it's editorial work or a commercial commission. Gone are the days when you can approach someone and say "here's my work - do you want to hire me?" - no-one's got the time for that. You just have to give people the confidence in you that you can hit the ground running and just be able to get on with things.
And trust me, that helps massively when by nature you're a bit nervous. I can't always get people with my confidence, but I can show people that I'm creative, passionate, knowledgeable and professional - which I hope is more important...
Showing posts with label theprintspace. Show all posts
Showing posts with label theprintspace. Show all posts
Friday, 14 December 2012
Fully Formed...
Labels:
Action on Addiction,
Article,
Barriers,
Blog,
Charity,
Commercial,
Commission,
Confidence,
Editorial,
Homework,
Job,
photography,
theprintspace,
Vulnerable,
Work
Sunday, 8 April 2012
The (Colour) Space Between Us...
The title's just the name of one of my favourite Zero 7 songs - nothing to do with the post, but I thought it was a little clever - check me out...
I mentioned in an earlier post that I'd decided to pick up a copy of Photoshop for the Mac, as opposed to working with my decrepit copy of CS2 on my PC. A look at my book last week encouraged me to take a fresh look at my colour management though, as there seemed to be some issues.
I get most of my work printed at theprintspace. They're friendly, do a very quick turnaround and include lots of helpful information on their website on colour profiling - fantastic if, like me, you want to make sure your prints are as close to what you see in your mind's eye as is possible.
Just recently though I've had a few images through that had either a bit of a cyan or magenta cast to them, and was wondering where this was coming from. I was working on my PC using a monitor calibrated with an i1 Display and I'd downloaded their ICC profiles to ensure my working colour profile was as close to their printers as possible. It just didn't make sense. I decided to check out the images I'd had printed on my Mac to see if there was a difference in the profiles.
I was actually pretty surprised...
Have a look at the image on the right - it's my Mac on the left and my PC on the right. Both in Adobe RGB. The Mac is running Photoshop CS5 and the PC is running CS2, but they've been calibrated using the same calibration tool a matter of days apart. The image on the PC looks much more natural, because that's basically how I wanted the shot to look when I edited it on the PC, but the image on the Mac screen is exactly the same image, just open on a different machine.
It's pretty scary...
The image on the Mac looks like it has a cyan/green cast to it - and it does. You could be mistaken for thinking that the Mac's the machine that's not calibrated properly, but given the images I'm getting back from the printer, it's actually the one that's most accurate. The PC screen, though you can't really see it here, has more of a yellow cast to it, making the shots look much warmer, but put them on another monitor and they look very different. As I've essentially been overcompensating for a particular colour cast, I've actually ended up introducing another with my corrections.
Print them out and the shots aren't too offensive - it's just you end up with a cyan cast and a much cooler image, but that doesn't suit a shot where my subject is pouring bright yellow lemon curd into jars - it's supposed to look warm, and the print image just doesn't look that way - it actually looks cold...
I decided to give it another go - like I've done with other shots that I've revisited to see if I can bring them out more, I gave this shot another go, now with Photoshop CS5 on what seems to be a better calibrated monitor, and ended up with this on the left... It feels much more natural to me - and much warmer too. It was edited using theprintspace's ICC profile for Fuji Gloss, and while it could do with a little more work (there's a little bit of a green cast, and I'd like to bring the reds down a little) it's nowhere near as 'cool' as the previous version.
Oh - and open the images by clicking on them. For some reason the smaller thumbnails render differently from how they look when they're open - the first image looks more red, while the other actually looks quite neutral. Open the second and you'll see that the second image looks almost drained of colour.
It's annoying when things like this happen - as far as I'm concerned if you calibrate your monitor using the same device, both monitors should look exactly the same, but this is clearly not the case here.

So it's difficult to know exactly what you're going to end up with - I was sat there at my PC thinking that I was editing an image that would be perfect when printed, but loading it on a different computer using a different monitor, you can see just how much difference there can be. Maybe when it comes down to it, I'm being too picky about things, but then, why spend the time setting up a shot and taking the image, before mastering it in Photoshop afterwards, only to find when it comes to printing that your colour profiles are completely off?
It's crazy - it's not something you can just convert to the new profile on your other computer - you have to start from scratch with the original RAW image. Best to get it right from the start than to have to go back time and time again, while spending a fortune paying for prints that don't look right...
I mentioned in an earlier post that I'd decided to pick up a copy of Photoshop for the Mac, as opposed to working with my decrepit copy of CS2 on my PC. A look at my book last week encouraged me to take a fresh look at my colour management though, as there seemed to be some issues.
I get most of my work printed at theprintspace. They're friendly, do a very quick turnaround and include lots of helpful information on their website on colour profiling - fantastic if, like me, you want to make sure your prints are as close to what you see in your mind's eye as is possible.
Just recently though I've had a few images through that had either a bit of a cyan or magenta cast to them, and was wondering where this was coming from. I was working on my PC using a monitor calibrated with an i1 Display and I'd downloaded their ICC profiles to ensure my working colour profile was as close to their printers as possible. It just didn't make sense. I decided to check out the images I'd had printed on my Mac to see if there was a difference in the profiles.
I was actually pretty surprised...Have a look at the image on the right - it's my Mac on the left and my PC on the right. Both in Adobe RGB. The Mac is running Photoshop CS5 and the PC is running CS2, but they've been calibrated using the same calibration tool a matter of days apart. The image on the PC looks much more natural, because that's basically how I wanted the shot to look when I edited it on the PC, but the image on the Mac screen is exactly the same image, just open on a different machine.
It's pretty scary...
The image on the Mac looks like it has a cyan/green cast to it - and it does. You could be mistaken for thinking that the Mac's the machine that's not calibrated properly, but given the images I'm getting back from the printer, it's actually the one that's most accurate. The PC screen, though you can't really see it here, has more of a yellow cast to it, making the shots look much warmer, but put them on another monitor and they look very different. As I've essentially been overcompensating for a particular colour cast, I've actually ended up introducing another with my corrections.
Print them out and the shots aren't too offensive - it's just you end up with a cyan cast and a much cooler image, but that doesn't suit a shot where my subject is pouring bright yellow lemon curd into jars - it's supposed to look warm, and the print image just doesn't look that way - it actually looks cold...
I decided to give it another go - like I've done with other shots that I've revisited to see if I can bring them out more, I gave this shot another go, now with Photoshop CS5 on what seems to be a better calibrated monitor, and ended up with this on the left... It feels much more natural to me - and much warmer too. It was edited using theprintspace's ICC profile for Fuji Gloss, and while it could do with a little more work (there's a little bit of a green cast, and I'd like to bring the reds down a little) it's nowhere near as 'cool' as the previous version.
Oh - and open the images by clicking on them. For some reason the smaller thumbnails render differently from how they look when they're open - the first image looks more red, while the other actually looks quite neutral. Open the second and you'll see that the second image looks almost drained of colour.
It's annoying when things like this happen - as far as I'm concerned if you calibrate your monitor using the same device, both monitors should look exactly the same, but this is clearly not the case here.

So it's difficult to know exactly what you're going to end up with - I was sat there at my PC thinking that I was editing an image that would be perfect when printed, but loading it on a different computer using a different monitor, you can see just how much difference there can be. Maybe when it comes down to it, I'm being too picky about things, but then, why spend the time setting up a shot and taking the image, before mastering it in Photoshop afterwards, only to find when it comes to printing that your colour profiles are completely off?
It's crazy - it's not something you can just convert to the new profile on your other computer - you have to start from scratch with the original RAW image. Best to get it right from the start than to have to go back time and time again, while spending a fortune paying for prints that don't look right...
Labels:
Adobe RGB,
Client,
Colour,
Colour Profile,
Colour Space,
CS2,
CS5,
Curd,
Cyan,
Macbook Pro,
Naked Jam,
PC,
Photoshop,
Print,
theprintspace,
Yellow
Subscribe to:
Posts (Atom)
